Anycubic Kobra S1 Max Charcoal Filter Upgrade | Clean Air Mod | VOC Reduction
What this is
A high-efficiency charcoal filter module designed specifically for Anycubic Kobra S1 Max, built to reduce odors and airborne particles during printing.
Why you need it
3D printing is not just plastic. It generates:
- Odors
- VOCs
- Fine particles
This upgrade solves that problem directly, without complicated mods.
KEY BENEFITS
- Significantly reduces printing odors
- Activated carbon filtration
- Optimized airflow design (not just decorative mesh)
- Tool-free installation
- Seamless integration with your printer
COMPATIBILITY
- Anycubic Kobra S1 Max
- Anycubic Kobra S1 Max Combo
PRINT SETTINGS
Recommended materials:
- PETG for balanced performance
- ASA for maximum heat resistance
Settings:
- Layer height: 0.2 mm
- Top layers: 0
- Buttom layers: 0
- Infill: 50%
- Walls: 6
- Supports: required
INSTALLATION
- Clip on the 2 sides (the glue is optional)
- Heat the drawbar so it can be bent easily
- Add activated charcoal (activated charcoal / carbon sponge)
- Put the lid on
- Remove existing filter (activated carbon bag)
- Insert printed module
- Done
WHY THIS DESIGN
Most filters:
- Look good
- Perform poorly
This one is engineered for real airflow:
- Even distribution
- Low resistance
- Maximum filtration efficiency
Download it, print it, and feel the difference in your workspace air quality.
⚠ Disclaimer:
I take no responsibility for any damage caused by incorrect installation or misuse.
Although incorrect installation is highly unlikely, as the 3D model was designed with proper alignment, and physical constraints in mind, the user is fully responsible for verifying correct placement and safe operation.
Use this adapter at your own risk.
If you like the model, don’t forget to:
⭐ Rate
❤️ Like
🔁 Share your print results
Enjoying the model?
If this design made your day a bit better or your print setup cooler, and if you’re feeling generous, you can buy me a coffee on Ko-fi!
Your support helps me keep creating and sharing more awesome stuff.
Support me here: https://ko-fi.com/adrian_m2025
Thanks a ton — and happy printing! 🚀
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
